Hexo Industries (M) Sdn Bhd
1-2-11, i-Avenue,
Medan Kampung Relau 1,
11900 Bayan Lepas,
Penang, Malaysia.
+604-611 1186
+604-611 1186
+6012-558 2052, +6012-954 1088

Saluki SFS-2000 Fusion Splicer (4 motors)

Previous 6 / 14 Next

Saluki SFS-2000 Fusion Splicer (4 motors) Optical Test Test & Measurement


The Saluki SFS-2000 is the new standard 4 motors fusion splicer. Light Weight, Touch Screen, Friendly UI, Fast Fusion and Heating, makes it very popular and hot.

Key Features

  • |  7s fast splicing, 18s highly efficient heating

  • |  320 times image magnification

  • |  10000 groups of fusion records storage

  • |  5mm fusing for ultra-short cleave length

  •  300 groups of splice modes, 100 groups of heating modes

  • |  220 counts of splicing and heating cycles with build-in battery

 
Applications
  • |  Data center

  • |  FTTx

  • |  Metro

  • |  Fiber Optic Components

  • |  Optical Assembly

  • |  R&D and Manufacturing


    Detailed

     

    Minimal Splice Loss
    Consistent splicing performance
    4 high precisely controlled motors
    High Precision Ceramic V-groove
    Typical splice loss:
    0.03dB (SM), 0.02dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)

    Great Splice Efficiency
    Minimum manual operation
    Automatic ARC calibration
    Auto-start splicing and tube heater operation
    Faster 7s splicing, 18s heating
    Easy maintenance
    Compatible Fiber Holder

    Ultra-high Capacity Battery
    6800mAh Li-ion battery with 220 splices per charge
    Providing all-day power for working
    Specialized in field work
    Fast 3.5h fully charged

    Proven Reliability
    Military quality, high level performance
    Best reliability even under tough environment

    Functions and Benefits
    7s fast splicing, 18s highly efficient heating
    320 times image magnification, 5mm fusing for ultra-short cleave length
    300 groups of splice modes, 100 groups of heating modes
    Ceramic presser foot, ceramic V-groove, all-in-one fixture
    Dual-directional fusing, auto fusing, intelligent heat shrink
    USB and SD card interface, auto update of U disk
    Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
    GUI (graphical user interface) and touch screen, convenient for operation
    Dust-resistant, water-resistant, shock-resistant, greater environment adaptability

     
     
    Technical Specifications
    Model SFS-2000
    Motor qty. 4
    Alignment  method Cladding alignment, manual alignment
    Applicable fibers SMF (G.652), BIF (G.657), MMF (G.651), DSF (G.653), NZDSF (G.655)
    Typical splice loss 0.03dB (SMF/BIF); 0.02dB (MMF);0.04dB (DSF); 0.04dB (NZDSF)
    Cleave  length 5 - 16mm (coated  optical  fiber diameter <=250μm)
    10mm (coated optical fiber  diameter: 0.25 - 3mm)
    Optical  fiber  diameter Cladding: 80 - 150μm,  coating layer:  0.1 - 3mm
    Return loss Better than 60dB
    Typical splicing time 7s (Fast mode)
    Typical heating time 18s
    Tension test 1.96 - 2.25N
    Applicable protection  sleeve 60mm,  40mm and  a series of protection  sleeves

    No. of splice/heating per battery full charge

    220 cycles

    Magnification time 320 times / 88 times
    Fusion records 10000  groups 
    Electrode service life Typical: 4000 splices,  can be replaced  by customers
    Construction  lighting Built-in lights with high-brightness  and  wide lighting area
    Operating condition

    Altitude: 0 to 6000m above sea level; Temperature:-10 to 50°C;

    Humidity: 0 to 95%RH, non-dew;   Wind:15m/sec*4

    Resistance features

    Shock: 60cm all surface drop

    Dust: Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X

    Rain: H=3mm/min for 10min, IPX2

    Port USB / SD
     
     
     
    Genaral Information
     

    Display

    High-performance  4.3  inch LCD

    Power Supply

    AC: 100-240V, 60Hz, 0-1.5A; DC: 10-15V

    Max. power consumption 55W
    Battery 11.1V, 6800mAh

    Battery service life

    Cycle charging: 300 - 500  counts,  can  be  replaced  by  customers

    Size

    120W x 130H x 154D (mm) 

    Weight

    1.65kg (excluding battery) / 1.95kg (including battery)

     

    Standard Package

    Standard package

    Q'ty

    Fusion splicer

    1 PC

    Fiber cleaver

    1 PC

    AC adapter

    1 PC

    AC power cord

    1 PC

    Primary coat stripper

    1 PC

    Jacket remover

    1 PC

    Spare electrode

    1 PAIR

    Cooling tray

    1 PC

    Cleanup set

    1 SET

    Carrying case

    1 PC

    Certificate of quality

    1 PC

    User manual

    1 PC

     


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version