Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
  +60129541088

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Fluke FoodPro Plus IR Thermometer

Previous 7 / 22 Next

Fluke FoodPro Plus IR Thermometer Fluke Thermal Imager & Thermometer


Key features
  • Two-in-one infrared thermometer for foodservice
  • Combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings
  • Features an integrated countdown timer with alarm that monitors line checks as well as cooking and cooling intervals
  • Provides a built-in fold-out probe for measuring internal food temperatures
Product overview: FoodPro Plus IR Thermometer
Fluke FoodPro Plus food safety thermometer measures both internal and surface temperatures with one handy tool
The Fluke FoodPro Plus thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. Use the FoodPro Plus to quickly and accurately measure food product temperatures to help detect potential food safety problems. It combines the same infrared surface temperature scanner as the FoodPro, and adds to it a fold out probe thermometer for measuring internal food temperature, and an integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals. Like the FoodPro, the FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.
The Fluke FoodPro Plus is useful for:
  • Receiving: Use the FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
  • Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures
  • Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
  • Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
  • Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste
  • Measures -35 to +275 °C (-31 to 527 °F) with non-contact thermometer and from -40 to 200ºC (-40 °F to +392 °F)with probe
  • Features backlit display for clear readings in poorly lit areas
  • Displays MAX temperature for quick reference
 

Specifications: FoodPro Plus IR Thermometer

Infrared Specifications
Temperature -35°C to 275°C
Accuracy (Assumes ambient operating temperature of 23°C ±2°)
Between 0°C and 65°C: ±1°C
Below 0°C: ±1° ±0.1 degree/degree
Above 65°C: ±1.5% of reading
Response time < 500 ms after initial reading
Spectral response 8-14 microns
Emissivity Pre-set for foodservice applications
Distance to spot size/Optical resolution (D:S) 2.5:1 @ 90% energy, typical
Typical working range (target illumination) ≈ 25 mm to 250 mm
Minimum target size 12 mm ø
Illumination to IR channel offset 13 mm
Probe Specifications
Temperature -40°C to 150°C
Accuracy (Assumes ambient operating temperature of 23°C ±2°)
Between –5°C and 65°C: ±0.5°C
Below –5°C: ±1°C
Above 65°C: ±1% of reading
Response time 7-8 seconds (3 time constants)
Probe dimensions Diameter: 3.0 mm
Length: 90 mm
Sensor type Thin-film platinum, class A, Resistance
Thermal device (RTD)
Operational Specifications
Repeatability Within accuracy specifications of the unit
Ambient operating range 0°C to 50°C
Relative humidity 90% (±5%) RH non condensing @ 30°C
Storage temperature -20°C to 60°C
Weight 150 g (with battery)
Dimensions 165 x 32 x 50 mm
Power, battery life 9 V alkaline
Battery life Alkaline, 10 hours minimum @ 23°C
Target illumination High brightness LED
Display resolution 4 digits, 0.1°C
Displayhold (7seconds) Yes
LCD backlit display Yes
Temperature display 4 digits, 0.1°C resolution
Maximum temperature displayed Yes
Timer Yes
Environmental data IP54 sealing (hand-washable, non-submersible)
Other Specifications (both)
Calibration certificate Calibration accuracy with NIST and DKD traceability
Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
Certifications CE NSF
Warranty 2 years
Options/Accessories Replacement probe
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.



Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  


Switch to Mobile Version
Subscribe Newsletter