Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
  +60129541088

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Agilent AGD-100 Controller

Previous 5 / 13 Next

Agilent AGD-100 Controller Agilent / Varian Vacuum Measurement Vacuum Products


Gauge Controllers
AGD-100 Controller

 

AGC-100 is a single channel controller compatible with the FRG 7xx, PVG-5xx, PCG-75x and CDG-500 series of active gauges and automatically identifies the active gauge connected.

AGD-100 is a low cost single channel display option for the FRG-700/702, PVG-5xx and PCG-75x series of active gauges.

Both units have user selectable measurement unit (mbar, Torr, Pascal), and adjustable setpoint control.


Active Gauge Selection Chart

Product Details


Part Number
Description
AGC100 AGC-100 active gauge control unit, for FRG 7xx, PVG-5xx, PCG-75x and CDG-500 Series
AGC100ADPT AGC-100, front adapter, rack adaptor
AGD100 AGD-100 active gauge display, for FRG-700/702 and PVG-5xx and PCG-75x series
X3001-60100 Digital Rough Gauge Cont, Torr, Nist
R3084301 PCB assembly, dual convection gauge, XGS-600 gauge controller
R3075301 PCB assembly, hot filament ionization gauge, XGS-600 gauge controller
R3080301 PCB assembly, inverted magnetron ion gauge, XGS-600 gauge controller
L6426301 Rack Mount Kit, XGS-600, Dual
L6422301 Rack Mount Kit, XGS-600, Off-Center, 19 in.
L6423301 Rack Mount Kit, XGS-600, On-Center, 19 in.
X3203-60012 TC, Convectorr, 2.75In, P-Type, Laser
R3124301 Tilt stand accessory, XGS-600 gauge controller

Features

  • Simplified setup with automatic identification of Agilent active gauges
  • Universal compatibility with user-selectable pressure units (mbar, Torr, Pascal)
  • Utilize pressure readings to perform critical operations

Ordering Details

Description Part Number
Active Gauge Controller for FRG 7xx, PVG-5xx, PCG-75x and CDG-500 Series AGC100
Gauge display for FRG-700/702 and PVG-5xx and PCG-75x Series AGD100
Accessories  
Front adapter for controller, rack adaptor, 3u AGC100ADPT
Cable (FRG700/702, PVG, PCG) 3 m / 9.9 ft AGCCBL103
Cable (FRG700/702, PVG, PCG) 5 m / 16.4 ft AGCCBL105
Cable (FRG700/702, PVG, PCG) 10 m / 33 ft AGCCBL110
Cable (FRG720/730) 3 m / 9.9 ft AGCCBL203
Cable (FRG720/730) 5 m / 16.4 ft AGCCBL205
Cable (FRG720/730) 10 m / 33 ft AGCCBL210
Cable (CDG500) 3 m / 9.9 ft AGCCBL303
Cable (CDG500) 5 m / 16.4 ft AGCCBL305
Cable (CDG500) 10 m / 33 ft AGCCBL310

 
Specifications

Technical Specifications

Measurement channels One (1)
Measurement range 2 x 10-10 to 1500 mbar (1.5 x 10-10 to 1125 Torr)
Measurement unit (selectable) Mbar, Torr, Pascal
Rate
A/D Converter
10/sec
16 bit
Setpoints
Setpoint relays
Channel assignment
Relay contact
Hysterisis
Contact rating
Connector

One (1)
One (1)
Potential free change over contact
Adjustable
30 VAC/1A; 60 VDC/0.5A
D-Sub, 9 pin, male
Display LED
Analog output
Range
Connector

0-10.3 V, sensor analog output signal
D-Sub, 9 pin, male
Supply 90-250 V, 50/60 Hz
Consumption < 30W
Operation Temperature (ambient) 5 to 50 °C
Digital Interface (AGC-100 only) RS-232C ; D-Sub, 9 pin, female

 

Outline Drawing

AGC-100/AGD-100 Controller Outline Drawing


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  


Switch to Mobile Version
Subscribe Newsletter