Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
sales@hexoind.com
 +60125582052
  +60129541088

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Agilent RGC-100 and RGC-150 Rough Gauge Controllers

AllVacuum ProductsVacuum MeasurementAgilent / Varian

Previous 3 / 13 Next

Agilent RGC-100 and RGC-150 Rough Gauge Controllers Agilent / Varian Vacuum Measurement Vacuum Products


Gauge Controllers
RGC-100 and RGC-150 Rough Gauge Controllers

 

Agilent’s rough gauge controllers are a cost-effective solution for pressure measurement in the 1 x 10-3 torr to 760 torr range. The RGC-100 and RGC-150 packages include the Thermocouple tube, sensor cables, and power supplies.

These vacuum gauge controllers are a perfect pre-calibrated, turnkey solution in a wide range of applications: general vacuum measurement in the rough vacuum range; monitoring forelines, chamber evacuation, and crossover to high vacuum pumps.

RGC150 RGC-150 rough gauge controller
RGC150KF16 RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller
RGC150KF25 RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller
RGC150CF RGC-150, 1.33in CFF TC, RGH VAC CONT
RGC150EKF16 RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller, ethernet
RGC150E RGC-150 rough gauge controller, with ethernet and software
RGC150ECF RGC-150, 1.33in CFF TC, RGH VAC CONT,ETH
RGC150EKF25 RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller, ethernet


Features
 
  • No calibration required at initial setup: Thermocouple gauge – Agilent 531 – and controller are pre-calibrated as a set at the factory.
  • Globally compatible: runs on 100-230 VAC, 50/60 Hz and displays in Torr or mbar (as well as in kPa for RGC-150).
  • Easily read from across a room, or in dimly lit locations: large bright LED display.
  • Easily integrated (RGC-100): Optional set point control, analog output, RS232 communication.
  • Monitor vacuum performance from a remote location (RGC-150): Optional Ethernet connection and software that allows for remote monitoring through a web browser.
Specifications

Agilent RGC-100 Rough Gauge Controller Technical Specifications
Measurement range   1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr)
Accuracy % of reading Units
±10% 1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr)
±15% 1.3 to 13.3 mbar (1 to 10 Torr)
±50% 13.3 to 213 mbar (10 to 160 Torr)
±25% 213 to 1000 mbar (160 Torr to 760 Torr)
Vacuum fitting   ⅛ inch NPT-M
Interface cable length   10 ft.
Sensor   Agilent 531 TC gauge tube
Display   See below
Dimensions   Mounts in 2.66 inch panel hole with 3 screws on 1.60 inch radius
Supply voltage   100-240 VAC, 50/60 Hz
Standards   CE, ROHS compliant
Optional setpoint controls   7 A, 250 V
Optional communication interface   RS-232
Optional analog output   0-5 VDC
Agilent RGC-150 Rough Gauge Controller Technical Specifications
Measurement range   1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr)
Accuracy % of reading Units
±10% 1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr)
±15% 1.3 to 13.3 mbar (1 to 10 Torr)
±50% 13.3 to 213 mbar (10 to 160 Torr)
±25% 213 to 1000 mbar (160 Torr to 760 Torr)
Vacuum fitting   ⅛ inch NPT-M
Interface cable length   10 ft.
Sensor   See below
Display   0.38 inch high 6 digit red LED
Dimensions   1.7 inch high, 3.52 inch wide, 5.35 inch deep
Analog output   0-5 VDC
Supply voltage   100-240 VAC, 50/60 Hz
Standards   CE, ROHS compliant
Set point controls   7 A, 250 V
communication interface   RS-232
Mounting   ⅛ DIN rack mount

RGC-150 Rough Gauge ControllerRGC-100 Rough Gauge Controller  

RGC-150 Rough Gauge Controller                                                      RGC-100 Rough Gauge Controller





RGC-150 Rough Gauge Controller Outline DrawingRGC-100 Rough Gauge Controller Outline Drawing  
RGC-150 Rough Gauge Controller Outline Drawing                   RGC-100 Rough Gauge Controller Outline Drawing

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  


Quick Links

Recent Post

Contact

1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.

+6011-6528 1088
+604-611 1186
+6012-954 1088

+6012-558 2052

sales@hexoind.com

+60125582052
+60129541088

https://www.hexoind.com

© 2019 - 2024 Hexo Industries (M) Sdn Bhd (Co. No. 939586T / 201101011453) | Privacy Policy        
Powered by NEWPAGES
Switch to Mobile Version
Subscribe Newsletter