Hexo Industries (M) Sdn Bhd
1-2-9, i-Avenue, Medan Kampung Relau 1, 11900 Bayan Lepas, Penang, Malaysia.
+6011-6528 1088
+604-611 1186
+6012-954 1088
+6012-558 2052
  +60129541088

Indonesia Branch
Jababeka Bizpark, Blok D/16, Jababeka Innovation Center, Pintu 6, Blok D/16, Cikarang, Bekasi, Jawa Barat 60292, Indonesia.

Singapore Branch
SpectrumSense Solutions
1 Scotts Road, #24-10 Shaw Centre, Singapore 228208.

Vacuum Degassing System - TableTop

Previous 1 / 3 Next

Vacuum Degassing System - TableTop Vacuum Degassing System Vacuum System Vacuum Products Vacuum Degassing System - TableTop Vacuum Degassing System Vacuum System Vacuum Products


VACUUM DEGASSING SYSTEM - TABLETOP

This is a range of degassing kit combinations using standard steel degassing chambers and vacuum pumps. 

The kits are supplied with all connection nozzles to the chamber and vacuum pump. If you require faster pumping times then larger pumps can replace the standard kit pump. 


3 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP3K4

The HXADP3K4 kit will comprise the following:
  • A 3 litre steel degassing chamber (156mm internal diameter and 155mm internal height)
  • A LC.4 rotary vane oil vacuum pump (Single stage, Pumping speed 4m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 18 secs.

 

9 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP9K4

The HXDP9K4 kit will comprise the following:
  • A 9 litre steel degassing chamber (206mm internal diameter and 270mm internal height)
  • A LC.4 rotary vane oil vacuum pump (Single stage, Pumping speed 4m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 45 secs.

 

9 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP9K8

The HXADP9K8 kit will comprise the following:
  • A 9 litre steel degassing chamber (206mm internal diameter and 270mm internal height)
  • An LB.8-AVE rotary vane oil vacuum pump (Single stage, Pumping speed 8m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 23 secs.

 

27 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP27K8

The HXADP27K8 kit will comprise the following:
  • A 27 litre steel degassing chamber (311mm internal diameter and 356mm internal height)
  • An LB.8-AVE rotary vane oil vacuum pump (Single stage, Pumping speed 8m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 73 secs.


27 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP27K12

The HXADP27K12 kit will comprise the following:

  • A 27 litre steel degassing chamber (311mm internal diameter and 356mm internal height)
  • An LC.12 rotary vane oil vacuum pump (Single stage, Pumping speed 12m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 49 secs.

 

42 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP42K12

The HXADP42K12 kit will comprise the following:
  • A 42 litre steel degassing chamber (373mm internal diameter and 381mm internal height)
  • An LC.12 rotary vane oil vacuum pump (Single stage, Pumping speed 12m³/hr, Final pressure 2 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 79 secs.

 

42 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP42K25

The HXADP42K25 kit will comprise the following:
  • A 42 litre steel degassing chamber (373mm internal diameter and 381mm internal height)
  • An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 38 secs.

 

76 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP76K25

The HXADP76K25 kit will comprise the following:
  • A 76 litre steel degassing chamber (460mm internal diameter and 460mm internal height)
  • An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 68 secs.

 

76 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP76K40

The HXADP76K40 kit will comprise the following:
  • A 76 litre steel degassing chamber (460mm internal diameter and 460mm internal height)
  • An LC.40 rotary vane oil vacuum pump (Single stage, Pumping speed 40m³/hr, Final pressure 0.5 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 43 secs.

 

118 LITRE VACUUM DEGASSING CHAMBER KIT – MODEL HXADP118K25

The HXADP118K25 kit will comprise the following:
  • A 118 litre steel degassing chamber (500mm internal diameter and 600mm internal height)
  • An LC.25 rotary vane oil vacuum pump (Single stage, Pumping speed 25m³/hr, Final pressure 0.5 mbar)
  • Mains cable fitted with a choice of UK 3 pin plug (standard) or European style 2 pin plug (to be specified when ordering).
  • 2 metres of clear wire reinforced plastic vacuum hose together with hose clips.
  • Vacuum pump oil.
  • Instructions

Approximate pump down times using this combination of chamber and pump based on a clean and empty chamber to a pressure of 2mbar (29.9 inches Hg) is 106 secs.


---
Please note :

  •  Degassing water based mixtures such as Plaster, Acrylic, Refractory Cements etc can lead to problems with the water vapor mixing with oil in the vacuum pump. If you are continuously degassing water based mixtures then we can supply special pumps and equipment that will reduce or prevent the problems associated with water based mixtures. Please contact us for advice.
  • The volume of the chamber is not the capacity of liquid that can be degassed. Liquids can expand when being degassed  and could be 4-5 times the initial volume.A suitable sized mixing bucket or container should be used inside the chamber to contain the silicon/resin to be degassed. The size of the container should be sufficient to allow for any expansion that may occur during the degassing process. ​
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  


Switch to Mobile Version
Subscribe Newsletter