Algodue

The current transformers (CT) are used to reducing the fine current to a secondary value of 5A or 1A.
For applications on electronic cards we made C.T. having secondary values:

WINTOOL software is provided free of charge for the remote management of the Algodue UPT210, UPM304, UPM307, UPM315 and UPM3100 three-phase network analyzers.
Wintool allows to show on a PC all the measured values and to carry out settings in a faster way.

WintoolNET software is provided free of charge for the remote management of Algodue three-phase network analyzers. WintoolNET is a software tool compatible with all UPM209 and UPM309 power meter models.
It communicates via Modbus RTU and TCP protocols, and manages completely the power meter.

PQM Class A Monitoring Tool is a software tool which provides the possibility to view and monitor all voltage, frequency and current parameters defined in the IEC 61000-4-30:2015 standard for Class A certification. PQM Tool is a software compatible with Algodue Power Quality Analyzers: PQM3000 and PQM4000.

PQM EN 50160 Data Analyzer is a software tool which performs a statistical analysis according to EN 50160 standard on data recorded by the Power Quality device. PQM Analyzer is a software compatible with Algodue Power Quality Analyzers: PQM3000 and PQM4000.

Modbus Client is a Modbus Master software tool able to communicate via Modbus RTU. Modbus Client is a software tool compatible with all UPA network Ananlyzers: UPA20, UPA30 and UPA41.
Main features:

Modbus Master software is provided free of charge for the remote management of Algodue energy meters with built-in RS485 Modbus communication. Modbus Master is a software tool compatible with all UEM series energy meters and RS485 Modbus communication module.
It communicates via RS485 Modbus protocol, and manages completely the energy meter.

M-Bus Master software is provided free of charge for the remote management of Algodue energy meters with built-in M-Bus communication. M-Bus Master is a software tool compatible with all UEM series energy meters and with M-Bus communication module.
It communicates via M-Bus protocol, and manages completely the energy meter.

PQM4000 (DIN 192×144) is a high-end power quality analyzer, able to monitor and record the major power quality parameters. It provides an accurate measurement, voltage characteristics are monitored according to Class A specification. It acts as event/fault recorder, capable to store a high number of voltage events and disturbances, frequency variations, inrush current, etc.

FCA3000 is a three-channel current converter with DC outputs. It converts the values measured by a Rogowski coil into true RMS value.
FCA3000 can be used with any model or size of MFC150 Rogowski coils, according to the application.

RPS51 is a multiscale Rogowski coil integrator, in a compact DIN rail enclosure, powered directly from the mains.
An integrator is essential to equalize and shift by 90° the output signal from the Rogowski coils. It consists of an active electronic
circuit with negligible offset and a good linearity.

RPS50 is a multiscale Rogowski coil integrator, in a compact DIN rail enclosure, powered directly from the mains.
An integrator is essential to equalize and shift by 90° the output signal from the Rogowski coils. It consists of an active electronic circuit with negligible offset and a good linearity.

Rogowski coil MFC190 (cross section 12mm) is a flexible current transducer based on Rogowski principle. MFC190 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight.

Rogowski coil MFC150-UI (cross section 8mm) is a flexible current transducer based on Rogowski principle. MFC150-UI coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight.

Rogowski Coil MFC150 (8 mm cross section) is a flexible current transducer based on Rogowski principle. MFC150 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.

Rogowski Coil MFC140-UI (7 mm cross section) is a flexible current transducer based on Rogowski principle. MFC140-UI coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.

Rogowski Coil MFC140 (7 mm cross section) is a flexible current transducer based on Rogowski principle. MFC140 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.

Communication modules can be combined with UEC1P5, UEC6C & UEC80 energy meters series. They are compact devices (1-2 DIN modules) suitable for managing energy meters in industrial and civilian application. Thanks to the optical port, the communication with energy meters is quick and easy.

UEC80-D is a 80A three-phase 3 or 4 wire programmable 4 DIN modules energy meter for the energy measurement in industrial and civilian application, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols.

UEC6C-X is a 6A 4 DIN modules three-phase 3 or 4 wire programmable energy meter for the energy measurement in industrial and civilian application, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols.

UEC1P5-D is a 6A 4 DIN modules three-phase 3 or 4 wire programmable energy meter for the energy measurement in industrial and civilian application, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols.

UEC80-2D is a 2 DIN modules single-phase energy meter for the energy measurement in industrial and civilian application available with MID
certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols.

UEC40-2C is a 1 DIN module single phase energy meter for the energy measurement in industrial and civilian application. Available with MID certification suitable for billing.
Besides the energy, the meter can measure the main electrical parameters and makes them available on the display.

UEM6C is a 4 DIN modules three-phase energy meter for the energy measurement in industrial and civilian application, with the following built-in communication, according to the model: RS485 Modbus RTU/ASCII, M-Bus or Ethernet Modbus TCP. Available with MID certification suitable for billing.